Altair Inspire Render and Studio version 2019.3 is now available

Everything related to Altair Inspire Render beta

Moderator: claudio

claudio
Thea Developer
Thea Developer
Posts: 144
Joined: Fri Jun 28, 2013 9:18 am

panagiotis wrote: Mon Nov 04, 2019 8:57 am
Takkegek wrote: Sun Nov 03, 2019 1:59 pm Hello panagiotis and claudio,
-I will send you the file.
scene received... We will examine it. Thank you.
Scene examined.

It loads correctly here, it just needs some memory.
  • In Thea Studio it takes almost 10 GB.
  • In Inspire Render/Studio it takes 7 GB (in shaded or RealTime mode).
  • When activating Interactive Rendering it goes up to more than 16 GB (which is basically the sum of Render + Thea)
One thing that is not optimized in Inspire Render/Studio are the instance proxies. This will take place in the next release (about January).
In this specific file there are a lot of proxy instances, and this causes the memory problem.

Thanks for the feedback, we'll certainly add this model to the set of benchmarks we use for improving the perfomances.

-Claudio
claudio
Thea Developer
Thea Developer
Posts: 144
Joined: Fri Jun 28, 2013 9:18 am

JQL wrote: Mon Nov 04, 2019 3:13 am I agree that Inspire Studio for 499 is a great price.
:thumbup:
JQL wrote: Mon Nov 04, 2019 3:13 am I knew from previous testing that you had real-time rendering but I didn't think it was up there yet. Unreal engine is, lumion and enscape too, there is also unity. All of these already have great quality.
Do you have direct experience with those or are you just comparing demo images/videos?
I'm open to comparing scenes if you have some... And to work on the weak points to be the best.
JQL wrote: Mon Nov 04, 2019 3:13 am Are you going to keep pushing for it?
Oh yes, we are working on it right now.
JQL wrote: Mon Nov 04, 2019 3:13 am Can we expect to see that real-time engine integrated into T4SU?
I don't know when, but yes, it will.

Thanks,
-Claudio
User avatar
JQL
Thea Beta Tester
Thea Beta Tester
Posts: 5162
Joined: Sun Jun 23, 2013 6:34 pm
Location: Lisboa
Contact:

OK. That's excellent news! If you are able to pull off a great realtime engine that works with Thea materials and you give us systems to insert assets in it and produce VR, then that is great.

I've worked with Unreal, tried Enscape and I am now working with Twinmotion.

Lumion I didn't try but the finished images I've seen are great and the amount of assets is impressive. There's something fishy in it though, like you now got displaced materials but I don't know if you can only use ready made displaced materials. I'm fond of having many diverse and quality materials already made, but I want to be able to make my own too. I got the feeling I was going to try it when they got bevels, I have the feeling I'm going to try it now with displaced materials, but something is always holding me back and it's not only the price.

Enscape I've seen it in action and used it with a really bad model and the lighting was in fact good. I don't know why, but I don't like it though, maybe it's the muscled man in the icon, maybe is the icons in the output, or maybe only because it's rental.

I have used Unreal and it works nicely. There's some steep learning curve though, but Unreal Datasmith really made the job easier. I don't think the integration is great with Sketchup. It's an export thing. The amount of quality you can take from it is great if you invest a lot of time. You also don't get ready made assets and it's excessively game oriented. I absolutely adore Substance integration with it. Loved Unreal but had no time for it. It's a lot faster to get quality from Thea output, so I quit.

I have had good results with Twinmotion free. But feel that the lighting in Enscape and Lumion is better.

I will wait for new Twinmotion and decide:
- Lumion - Very steep price, but one time payment, network license and optional upgrade only. It's a complete and fast solution and seems it does everything we need though I have doubts about material customization.
- Twinmotion - Free for now, let's see the price in the future. It already yields good results if you can control it. A lot of bugs. Assets are stone age and sparse. UI isn't streamlined but I heard Lumion's worse. Seamless integration with Unreal seems in the pipes (this is truly a strong point) and it also will have RTX tech to push quality further.

I'm betting on Twinmotion for now. If it disappoints I might go for Lumion.

I got the quote for Altair Render and it's too steep priced for me because I don't see what I can get more than I have right now with T4SU that is worth all the euros you charge annually. Honestly, I find Lumion better value for the money though it is a lot more expensive. It has all to do with Realtime, Fast full rendering, a lot of assets, VR, animation and panorama.

Altair Render can't compete with that yet. I hope it will.

Altair Studio at 499 would be great if I needed another modeller OR if you had something that would replace Sketchup's Layout. You haven't got it yet nor the assets, nor the realtime really polished. If you had that I would definetelly consider using it. Right now it's too much money for a companion software.

I have also to think that I will need BIM in the future and Altair Studio has nothing to do with that yet.

I'm hoping Thea4SU realtime is coming in a near future, not in a distant one. That would definetely make me ignore all other renderers out there.
claudio wrote: Mon Nov 04, 2019 9:40 pm
JQL wrote: Mon Nov 04, 2019 3:13 am I knew from previous testing that you had real-time rendering but I didn't think it was up there yet. Unreal engine is, lumion and enscape too, there is also unity. All of these already have great quality.
Do you have direct experience with those or are you just comparing demo images/videos?
I'm open to comparing scenes if you have some... And to work on the weak points to be the best.
I will finish a project in Sketchup and Twinmotion and share it with you after. Maybe that helps. I assembled it in a fast output with a speed I couldn't do with Thea. It produced not so bad output.

I'm now working on testing to what extents I could push the model in Twinmotion for higher quality and what kind of output I could produce with it.

The idea is to compare what compromises I can make in which situations. I know Thea will be there for highest standards, but I need something that can pull off competitions fast. That kind of job requires being able to easily place tons of assets, have fast render times and still get good output. It doesn't need highest standards but I don't want to loose too much of the quality I could pull from Thea either.
www.casca.pt
Visit us on facebook!

Win 10 64bit
Sketchup 2017 64bit
Intel i7 5820K 3.3Ghz 32Gb Ram
Nvidia Titan X 12Gb
d4m4rk
Licensed User v1.5
Licensed User v1.5
Posts: 371
Joined: Tue May 19, 2009 9:09 am
Location: Australia, Geraldton
Contact:

Thanks JQL, that's quite nice comparison. Though it's 100% new for me, I'm thinking about Lumion as well now. The price is a bit steep, but that's not the case as they seem to be doing a great job. At least I know I can go on with arcviz & could offer more landscaping related service as well. Arcviz has been covered with Thea 1.5 quite nicely but landscaping has fallen through many times because of being too much time consuming/expensive. Actually that's the main thing I was hoping/waiting for Thea environmental & landscaping improvement/development that never came. Now Altair seems to be heading even more further from that direction unfortunately. Correct me if I'm wrong.
Any idea if/how good Lumion imports +100MB OBJ files?
User avatar
JQL
Thea Beta Tester
Thea Beta Tester
Posts: 5162
Joined: Sun Jun 23, 2013 6:34 pm
Location: Lisboa
Contact:

I have no idea. I will test it when they have Lumion 10 trials available.

The price is steep but it's a network license (meaning any person in your office can work with it as long as it's a single activation at a time), it seems to include tons of good assets that basically pay off, you pay it once and it will work forever and if you want to pay the upgrade fee you get 66% off the new release. It's expensive but fair and the output is good and most importantly if you cease to pay because of some circumstances in life, you keep what you paid for forever.

It's a lot of investment though so I won't move into it until I see Twinmotion's new version first.

Altair Render, at it's price, could be competitive when it's realtime is good and if it is able to integrate vegetation like forest pack, animated people like Anima, and other animated stuff like animals, water, vehicles, nature. These are really impressive to clients, more than photorealism, imho and are included with both Twinmotion and Lumion or via 3rd party apps in Software like 3Ds Max, Unreal, Cinema 4D. Thea only has a plugin for the last one.

We need options to get things done and keep up with what people using other software can do.
www.casca.pt
Visit us on facebook!

Win 10 64bit
Sketchup 2017 64bit
Intel i7 5820K 3.3Ghz 32Gb Ram
Nvidia Titan X 12Gb
The_human
Posts: 36
Joined: Thu Aug 01, 2019 12:00 pm

Hi There

this news means the Thea Studio never will publish new Version ? and 1.5 was the last version of that and And has "Altair inspire render "replaced it?

I see the Optix denoiser on "inspire render" and its good news . what else thing is improved rather than Thea studio 1.5? some issue is important for me, please clear this fo me :

- is exporting the imported model possible?

- The.pack file has 2GB limitation . is it solved in "Altair Inspire Render"?

- which method is the way of transforming the model from Sketchup to "Altair Inspire Render"? merge and remerge or LiveSync?

- any news about MIP-MAP or Substance importer?

Thanks in advance
The_human
Posts: 36
Joined: Thu Aug 01, 2019 12:00 pm

The_human wrote: Tue Feb 25, 2020 11:42 am Hi There

this news means the Thea Studio never will publish new Version ? and 1.5 was the last version of that and And has "Altair inspire render "replaced it?

I see the Optix denoiser on "inspire render" and its good news . what else thing is improved rather than Thea studio 1.5? some issue is important for me, please clear this fo me :

- is exporting the imported model possible?

- The.pack file has 2GB limitation . is it solved in "Altair Inspire Render"?

- which method is the way of transforming the model from Sketchup to "Altair Inspire Render"? merge and remerge or LiveSync?

- any news about MIP-MAP or Substance importer?

Thanks in advance
golden support and responsiveness :lol: :lol: :lol:
The_human
Posts: 36
Joined: Thu Aug 01, 2019 12:00 pm

The_human wrote: Tue Feb 25, 2020 11:42 am Hi There

this news means the Thea Studio never will publish new Version ? and 1.5 was the last version of that and And has "Altair inspire render "replaced it?

I see the Optix denoiser on "inspire render" and its good news . what else thing is improved rather than Thea studio 1.5? some issue is important for me, please clear this fo me :

- is exporting the imported model possible?

- The.pack file has 2GB limitation . is it solved in "Altair Inspire Render"?

- which method is the way of transforming the model from Sketchup to "Altair Inspire Render"? merge and remerge or LiveSync?

- any news about MIP-MAP or Substance importer?

Thanks in advance
really no reply after 7 days ?! is here forum?!
imodel
Licensed User v1.5
Licensed User v1.5
Posts: 500
Joined: Sun Jun 14, 2009 6:37 pm

1. I don't buy software from resellers
2. I don't participate in subscription model software.

Goodbye Thea.
claudio
Thea Developer
Thea Developer
Posts: 144
Joined: Fri Jun 28, 2013 9:18 am

The_human wrote: Wed Mar 04, 2020 10:31 am really no reply after 7 days ?! is here forum?!
Hi The_Human, sorry for not replying you sooner, I really missed this. My fault.
Regarding your questions:
The_human wrote: Tue Feb 25, 2020 11:42 am this news means the Thea Studio never will publish new Version ? and 1.5 was the last version of that and And has "Altair inspire render "replaced it?
Correct. Inspire Render is the successor of Thea Studio.
The_human wrote: Tue Feb 25, 2020 11:42 am - is exporting the imported model possible?
Exporting from Inspire Render you mean?
No, you can import in a lot of formats (about 30), but you can only save into the native format.
The_human wrote: Tue Feb 25, 2020 11:42 am - The.pack file has 2GB limitation . is it solved in "Altair Inspire Render"?
The old file format did not change.
In the new file format there are no limitations.
The_human wrote: Tue Feb 25, 2020 11:42 am - which method is the way of transforming the model from Sketchup to "Altair Inspire Render"? merge and remerge or LiveSync?
Import or merge.
If you use SketchUP and TheaForSU, all the material assignment and definition is done directly in SU.
Inspire Render can be used to add additional geometry.
The_human wrote: Tue Feb 25, 2020 11:42 am - any news about MIP-MAP or Substance importer?
Substance importer is going to be released soon.
The_human wrote: Tue Feb 25, 2020 11:42 am Thanks in advance
You're welcome
-Claudio
Post Reply

Return to “Altair Inspire Render beta”