BED ROOM

Final renders, ready to show off.
User avatar
JQL
Thea Beta Tester
Thea Beta Tester
Posts: 4774
Joined: Sun Jun 23, 2013 6:34 pm
Location: Lisboa
Has thanked: 7 times
Been thanked: 48 times
Contact:

Sat Apr 13, 2019 2:10 pm

Nice mood!
www.casca.pt
Visit us on facebook!

Win 10 64bit
Sketchup 2017 64bit
Intel i7 5820K 3.3Ghz 32Gb Ram
Nvidia Titan X 12Gb
User avatar
Pery6203
Posts: 18
Joined: Thu Dec 06, 2018 3:35 pm
Has thanked: 8 times
Been thanked: 31 times

Sat Apr 13, 2019 2:29 pm

Tomasz wrote:
Sat Apr 13, 2019 1:15 pm
Nice to see your talent in action here. :)
glad YOU liked it,
making realistic things in computer/paper is my hobby , i like corona but 3ds max or like programs are not for me :D . i am used to vray in sketchup but never satisfied with it , yes it gives good results but at the cost of time , so i was searching for renderer like corona inside sketchup , and i found thea v2 :clap: using it from some time and totally loving it.

thanks to the Devs. for giving us this masterpiece . keep it up , it will be at the top in some time. :)
These users thanked the author Pery6203 for the post (total 4):
jc4d (Sat Apr 13, 2019 3:39 pm) • Tomasz (Sat Apr 13, 2019 6:17 pm) • pedrinalex (Sun Apr 14, 2019 12:54 am) • majid (Mon Apr 15, 2019 9:02 pm)
Rating: 16%
User avatar
Pery6203
Posts: 18
Joined: Thu Dec 06, 2018 3:35 pm
Has thanked: 8 times
Been thanked: 31 times

Mon Apr 15, 2019 7:15 am

playing with materials
Attachments
chair.jpg
These users thanked the author Pery6203 for the post:
majid (Mon Apr 15, 2019 9:00 pm)
Rating: 4%
User avatar
Pery6203
Posts: 18
Joined: Thu Dec 06, 2018 3:35 pm
Has thanked: 8 times
Been thanked: 31 times

Mon Apr 15, 2019 7:57 am

dont know why, but glare and optix denoiser dont work together , if i enable denoiser , glare effect goes . :?
Attachments
scene 1.jpg
These users thanked the author Pery6203 for the post:
majid (Mon Apr 15, 2019 8:55 pm)
Rating: 4%
User avatar
majid
Thea Beta Tester
Thea Beta Tester
Posts: 667
Joined: Sun May 17, 2009 1:22 pm
Has thanked: 138 times
Been thanked: 52 times
Contact:

Mon Apr 15, 2019 8:52 pm

Pery6203 wrote:
Sat Apr 13, 2019 5:38 am
Tomasz wrote:
Fri Apr 12, 2019 2:36 pm
If you ask then every layer below the second Basic layer will not have effect on the material because the second layer weight is 100%. I doesn't have Weight Map neither, so no chance to see anything below. Two layers will be enough then.

With regards to material creation, I am not an exert. You may check fabrics in our Online repository to learn from them.
thanks tomasz ,
i dreaded somewhere in forum or guide , if we put value of 100% for all layer , say for 4 layer in our case , then automatically equal value goes for each layer , in our case 25 % . to check it i am doing a quick test by deleting 2nd and 3rd layer. will post results.
I guess there is a misunderstanding here.
each top layer covers the beneath layer completely except if:
1- lowering down the layer weight, or
2- use a layering mask so that controlling the layers mixture

The premise you mentioned is about the energy conservation law (or some other technical name) that claims the outgoing energy would not exceed entering energy. Thea is designed so that the total sum outgoing (rendering) 1 unit light energy not exceeding 1 unit entering light energy automatically. it means there is no need to care about the total sum, it would not disobey the physical world rules. but in layer combination the aforementioned tips must be considered.
By the way you have created really nice materials and also the final result is really amazing. I think most of materials could be achieved in 1 or 2 layers :clap: :clap: :clap: :clap:
These users thanked the author majid for the post:
Pery6203 (Tue Apr 16, 2019 7:31 am)
Rating: 4%
User avatar
majid
Thea Beta Tester
Thea Beta Tester
Posts: 667
Joined: Sun May 17, 2009 1:22 pm
Has thanked: 138 times
Been thanked: 52 times
Contact:

Mon Apr 15, 2019 9:03 pm

Pery6203 wrote:
Mon Apr 15, 2019 7:15 am
playing with materials
I liked the cloth material too much, :clap: :clap: :clap: Would you mind sharing the settings please?
User avatar
Pery6203
Posts: 18
Joined: Thu Dec 06, 2018 3:35 pm
Has thanked: 8 times
Been thanked: 31 times

Tue Apr 16, 2019 7:30 am

thank you majid for the guidance , that energy thing is completely out of syllabus for me :crazy: :D
i am very happy to share these materials with the community , i am not sure if this is ok to share it here or not , moderator can delete this if this is the not right way.

file is too large to upload here so sharing google drive link.

https://drive.google.com/open?id=1F5z7K ... BMIgiyzDFc
These users thanked the author Pery6203 for the post (total 3):
werthen (Tue Apr 16, 2019 7:44 am) • majid (Tue Apr 16, 2019 10:44 am) • damj (Tue Apr 16, 2019 1:32 pm)
Rating: 12%
User avatar
majid
Thea Beta Tester
Thea Beta Tester
Posts: 667
Joined: Sun May 17, 2009 1:22 pm
Has thanked: 138 times
Been thanked: 52 times
Contact:

Tue Apr 16, 2019 2:30 pm

:clap:
Really talented and nice renders! you are very welcome!
These users thanked the author majid for the post:
Pery6203 (Tue Apr 16, 2019 6:28 pm)
Rating: 4%
User avatar
Rombout
Thea Beta Tester
Thea Beta Tester
Posts: 14815
Joined: Tue May 12, 2009 12:42 am
Location: Curacao, Netherland Antilles
Has thanked: 15 times
Been thanked: 201 times

Wed Apr 17, 2019 2:21 am

Man these scenes all look good, main thing is because they seem to be all high poly. What is you modeling app? Doesnt look like su models to me.

PS for that silk, you need to use metal look, either mix it with a metal or set the K value and lower the IOR value. Perhaps try .8 ior and use 2-3 for the k value.
These users thanked the author Rombout for the post:
Pery6203 (Wed Apr 17, 2019 3:17 am)
Rating: 4%
User avatar
Pery6203
Posts: 18
Joined: Thu Dec 06, 2018 3:35 pm
Has thanked: 8 times
Been thanked: 31 times

Wed Apr 17, 2019 3:20 am

Rombout wrote:
Wed Apr 17, 2019 2:21 am
Man these scenes all look good, main thing is because they seem to be all high poly. What is you modeling app? Doesnt look like su models to me.

PS for that silk, you need to use metal look, either mix it with a metal or set the K value and lower the IOR value. Perhaps try .8 ior and use 2-3 for the k value.
They are all sketchup scenes. Some models are donloaded form internet and some models are converted by transmutr. :)
These users thanked the author Pery6203 for the post:
majid (Wed Apr 17, 2019 4:51 am)
Rating: 4%
Post Reply